National Cutting Tools is one
of the leading Manufacturers, Exporters and Suppliers of Pipe
Beveling Machine. It is used for the purpose of beveling the Pipe
End. Pipe is Beveled from the Outer and Front is faced by two different
tools. The Pipe remains Stationery and the Beveling Head rotates and comes
out of the Head Stock for cutting the Pipe End. It consists of the
following:-
Bed : The Bed of Pipe Beveling Machine is made of Cast
Iron. It is Very Rigid and sturdy in construction so as to take maximum
Load and absorb maximum vibrations. It is provided with four Nos.
Foundation Holes of Dia M20 at four corners of the bed. It is also
provided with Four Tapped holes of 5/8 BSW near the Foundation Holes. The
Head Stock and Clamping Vice is fitted on the Bed.
Head Stock : he Head Stock body of Pipe Beveling Machine
is made of Cast Iron. It is Very rigid and sturdy in design. The Head
Stock is designed for Four Nos. Spindle speeds. All the Gears are of
helical type made out of Axle Forging. The width of gears is 50 mm. The
Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy
Duty Ball Bearings. The Input Shaft will be provided with a pulley having
three grooves for C-Section V-belts. The Main Spindle is mounted on two
Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The
Sleeve along with main spindle fitted with Beveling Head is mounted in the
Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder
actuated electrically makes the movement of the sleeve in the Head Stock.
The Movement of the Sleeve can also be made manually. The Head Stock is
Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil
Level Indicator.
Clamping Vice : The Box Type Clamping Vice is fitted on
the Bed. The Vice is provided with Round Clamping Jaws for each size (4,
5, 6, 7, 8,). The Vice will be Self-centering type. The movement of the
Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated
electrically. The Vice will be very rigid and sturdy in design. Machine
will be supplied with single clamping vice.
Beveling Head : A special Beveling Head will be provided
with the machine. Two Tools of HSS will be used, One for Beveling and
second for Root Face. The Beveling Tool will be mounted in a special
Spring Loaded Tool Holder with a Roller device. It is fitted on the main
spindle that is then mounted in the traveling Sleeve.
Technical Specifications
Model No. |
NCT-B- 4" to 8" |
Capacity of the machine for Beveling Min. |
4" N.B. Pipe |
Capacity of the machine for Beveling Max. |
8" N.B. Pipe |
Outer Dia of the Sleeve |
200 mm |
Main Spindle Bearings (Taper Roller) |
32218 & 32219 |
Number of Spindle Speeds |
Four Nos. |
Cutting Tools Required (HSS 10% Cobalt)or Carbide Tool |
3/4" (Carbide Tool) |
Main Motor |
15 H.P., 960 RPM |
Max. Travel of the Sleeve |
90 mm |
Approx. Wt. Of the machine. |
2800 Kgs. |
Model No. |
NCT-B- 6" to 16" |
Capacity of the machine for Beveling Min. |
6" N.B. Pipe |
Capacity of the machine for Beveling Max. |
16" N.B. Pipe |
Outer Dia of the Sleeve |
300 mm |
Main Spindle Bearings (Taper Roller) |
32228 & 32226 |
Number of Spindle Speeds |
Four Nos. |
Cutting Tools Required (HSS 10% Cobalt) |
1" (Carbide Tool) |
Main Motor |
30 H.P., 960 RPM |
Max. Travel of the Sleeve |
90 mm |
Approx. Wt. Of the machine. |
8000 Kgs. |